DM-
SV01 ● Product Manual ● Rev. 1.1
73
2. Remove the mechanics from riser cards and cage E1.S in order to have access to the CMOS
jumper.
3. Push aside the small clamp that keeps the battery in the holder (step 1).
4. Completely remove the battery from the holder (step 2).
Figure 88: Battery removal
In order to insert the CMOS battery, please follow the instructions below.
1. Insert the CR2032 battery in the holder, with the positive (+) terminal facing the inner side of the
server, until it is locked inside the holder.
2. Assembly back the mechanics of the riser cards and cage E1.S.
3. Insert the DM-SV01 server back into the shelf so it is powered on again.
