DM-
SV01 ● Product Manual ● Rev. 1.1
69
Figure 81: removing the E1.S disk from 2xE1.S adapter Type II
2. Slide the disk off the slot until it is completely removed.
5.7 Fans installation
Follow the sequence below for replacing the fans of the DM-SV01 server.
● Completely remove power from the system (remove the DM-SV01 server from the shelf).
● Remove the air duct as explained in section “5.1”.
● Disconnect the fan connector by pulling it up (caution: disconnect the fan by holding the white
connector; do not remove the fan by holding the connector wires as it may cause damage to the
fan cable).
Figure 82: Disconnection of fan connector
● Hold the fan and pull it up until the fixing rubbers are released from the mechanics (step 1) and
then move it back until it is completely removed (step 2).
