LANcat
User Manual
Page A-16
Defining Custom Standards
Existing cable test standards can be modified to create additional
custom standards. Custom Standards that have been defined by the
user are then available as a Cable Standard and are identified by an
asterisk (*).
The tests performed and the PASS/FAIL limits are set by copying
one of the existing cable test standards. The customization consists
of selecting which pairs will be included in the tests and which
tests will be performed.
To create a custom standard:
1.
Set dial to Autotest,
Quick
, Wire Map, Length
or Traffic.
2.
Press either arrow key to
display the cable standard
library.
3.
Select a test standard to copy for
the new custom test standard,
then, press EDIT (F2).
4.
Press SELECT/DESELECT
(F3) to choose the tests that
will be performed. Press either
arrow key to move up or down
the list.
Selected tests (indicated by a
√
mark) will be included in the
custom test.
F1
F2
F3
F4
F1
F2
F3
F4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
