6
General Information
CHECK II Quick Start Guide
Sleep and Active Mode
To conserve the internal battery power, both the instrument and the
PDA are programmed to timeout, or go into
Sleep
mode when no
activity is detected over a specified time period.
The
Sleep
function is controlled separately for each component. As a
resul
t, the instrument can remain active (―awake‖) while the PDA is
asleep, and the PDA can remain active (―awake‖) while the instrument is
asleep.
Replacement Parts
This instrument uses high voltage during operation, and should only be
serviced by qualified personnel.
Labels
There are several labels on the unit including the following.
The
WARNING
symbol indicates that the user should refer to the
documentation before using the instrument.
Datacolor CHECK II instrument model and serial number.
Safety Warnings
Light Source.
Do not stare directly into the open port located at the
bottom of the instrument, when a measurement is in progress. Staring
directly into the light source can result in eye discomfort similar to that of
staring at a camera flash.
CAUTIONS
(1) Disconnect all power before servicing.
(2) The power cord supplied must be used.
(3) There are no user serviceable parts for this system.
Instrument Maintenance
There are no us
er-serviceable parts for this equipment.
