Datacolor 200 User Guide
5
Power is supplied to the back of the unit via a 3-prong male connector.
WARNING
The power cord supplied with the unit
must
be used.
Instrument Communications Cable
The instrument is connected to a computer through a USB port.
USB Cable Connection
NOTE
A serial connection can also be used to connect to the
instrument. A serial cable is available for purchase.
Cable Installation
1. Plug the female end of the power cord into the
power receptacle on the rear panel of the
instrument. Insert the plug into a standard AC outlet.
2. Connect the instrument cable to the appropriate
connector on the rear panel of the instrument.
3. Connect the instrument cable to a communications
port on the back of the computer.
4. Tighten each connection securely to ensure proper signal.
NOTE
When the connection is made and the program is launched, the instrument will be detected
automatically
