DataCard ImageCard Select, User Manual

Page: 20 / 155

2-4
Using the printer
User’s Guide for Select™ Platinum Series™ Printers
For magnetic stripe cards, the magnetic stripe faces down and is positioned
toward the side of the printer that opens (see Figure 2-3). (For some custom
applications, you might receive instructions to place cards in a different
orientation.)
For smart cards, position the card so the chip is up and toward the open end of
the card cartridge.
Figure 2-3: Load cards into the card cartridge
Do not run the printer for an extended time without cards in the card cartridge.
Load more cards as soon as you are prompted.
4 Replace the card cartridge in the cavity (step 1 in Figure 2-4). Push the bottom of
the card cartridge toward the printer until it clicks into place (step 2 in Figure 2-4).
Figure 2-4: Replacing the card cartridge
If the printer has a locking card cartridge, lock the cartridge after replacing it.
♦
Magnetic Stripe
Smart Card Chip
i
1
2
i