8
Owner’s Manual
Loading Blank Cards in the Input Hopper
To load the Input Hopper, perform the following steps:
1.
Unlock and lift up the Top Cover.
2.
Remove the Input Hopper Card Weight.
3.
Insert up to 100 blank cards in the Input Hopper, with the front of the card
up and the top edge of the card toward the rear of the 150
i
system.
If you are encoding Magnetic Stripe cards, place the Magnetic Stripe face
down and oriented toward the rear of the 150
i
system. If the optional front
Smart Card module is being used, insert the Smart Card so the chip is facing
up and to the left as shown. If the optional rear Smart Card Module is being
used, insert the Smart Card so the chip is facing down and to the right.
Contactless cards can be encoded with the card positioned either way.
4.
Replace the Input Hopper Card Weight oriented as shown.
5.
Close the Top Cover.
Summary of Contents for 150i
Page 6: ...vi ...
Page 23: ...150i Desktop Card Personalization System 17 ...
Page 24: ...18 Owner s Manual ...