background image

 

3 / 10 

Introduction

 

 

The 

ET-HK0101-MC HDMI 1.3 over Single CAT5

 

Extender 

boosts up your 

video/audio transmission distance up to 60m (200ft) in HDTV 1080i format, 40m (130ft) in 
HDTV 1080p format, and 20m (65ft) in HDTV 1080p with 36 bit color depth. With only one 
cost effective LAN cable, users can readily extend HDTV sources from DVD players, 
Blu-ray Disc player, PS3, PC, and any other kinds of sources compliant with TMDS to 
distant display monitors including HDMI/DVI enabled TV sets or LCD PC monitors. With 
the state-of-the-art Silicon Image chipsets equipped, deep color video, DTS-HD or Dolby 
TrueHD audio, and HDCP supports and compatibility are all further insured. This flexibility 
makes HDCP compliant DVD players or PS3 transmit utmost high quality video and audio 
with a greater distance at the minimal cost, when integrating several components apart. 

The ET-HK0101-MC includes two units: transmitting (ET-HK0101-TC) and receiving 

(ET-HK0101-TC) units. The transmitting unit is used to capture the input HDMI/DVI signals 
and carry the signals through one RJ-45 connector into one cost effective CAT-5/5e/6 LAN 
cable. The receiving unit is responsible for equalizing the sent TMDS multimedia data. The 
transmission distance between the sending and receiving units can be up to 60m (200ft) 
under HD (720p/1080i) or 40m (130ft) under Full HD (1080p). With an 8-level equalization 
control knob on the receiving unit, users can adjust the equalization strength to the 
received TMDS signals accordingly, and therefore optimize the transmission distance 
between source and destination. 

 

 

Introduction

ET-HK0101-TC

 

ET-HK0101-RC

 

Summary of Contents for ET-HK0101-RC











Reviews: