background image

 

- 7 - 

     

 

FCC/CE Statement 

 
This device complies with part 15 of FCC Rules and EN 55022/55024/61000-3 for CE 
certification. Operation is subject to the following two conditions: (1) this device may 
not cause harmful interference, and (2) this device must accept any interference 
received, including interference that may cause undesired operation. This equipment 
has been tested and found to comply with the limits for a Class A digital device, 
pursuant to part 15 and 2 of FCC Rules and EN 55022/55024/61000-3 for CE 
certification. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy and. if not 
installed and used in accordance with the instruction guide, may cause harmful 
interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 
 

¾

  Re-orient or relocate the receiving antenna. 

¾

  Increase the separation between the equipment and the receiver. 

¾

  Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected. 

¾

  Consult a service representative for help. 

 
Properly shielded and grounded cables and connectors must be used in order to 
comply with FCC/CE emission limits. Changes or modifications not expressly 
approved by the party responsible for compliance could void the user s authority to 
operate the equipment. 

 

 

 

 

 

 

 

 

 

 

 

GREEN-BOX TECHNOLOGY CO., LTD. 

2F, No.198, Chung Yuan Rd., 

Chung-Li Ind. Zone, Chung-Li 320, Taiwan 

Tel: +886-3-435-8189     Fax: +886-3-462-5477

 

E-Mail

[email protected]

 

Summary of Contents for ET-DF0101-TG500









Reviews: