DataApex Clarity INT7, Manual

Page: 24 / 42

INT7 A/D Converter 5 Troubleshooting
5 Troubleshooting
If you will not find your answers here, use the www.dataapex.com website
where the Support menu will navigate you to frequently asked questions
(FAQ),
Clarity email conference archive or contact to DataApex helpdesk.
5.1 Locate your problem
When troubles occur, the fastest way to find a solution for it is to search for
it in the following index via the
Dialog (window), in which the problem
occurred, Error Messages that appear or according to utilized Hardware .
The name of the window/dialog is visible in its header.
Note: Names of individual Clarity Instruments appear in the header instead of
the common term “Instrument”.
List of windows and dialogs
Dialogs
Clarity pg 32 .
Data Acquisition pg 34 .
Instrument pg 32 .
Method Setup pg 32 .
Sequence pg 32 .
Single Analysis pg 32 .
System Configuration pg 21 ., pg 32 ., pg 34 .
List of Error Messages
Error Messages
Board malfunction pg 21 .
Cannot create detector pg 21 .
Cannot find driver file ... pg 21 .
Cannot find first board pg 21 .
Cannot find second board pg 21 .
Disabled (in the status line) pg 32 .
Error Occurred During Setup pg 21 .
Simulated (in Data Acquisition) pg 34 .
Note: To find solutions for error messages not listed above, check the Clarity
Getting Started Guide or visit our web pages www.dataapex.com.
- 20 -