13
3. Fit the camera riser screw,
item O
, from below the
prompter frame’s long top slot. Marry the camera’s
base plate screw hole with Camera riser screw and
secure the camera to the frame. Adjust position of
the camera so the camera lens is at the edge of the
prompter frame.
4. Turn on the tablet being used and launch the
DV
Prompter
software, then prepare the prompting text
to be used. Also set up for the chosen optional
remote control. See page 17 also.
5. Put the configured tablet into the mounting bracket,
item E
, and ensure it is held securely by adjusting the
size of the bracket holders for a snug fit and locking
them in place. Use locking lever on
item E
.
6. You should now be ready to start using the Prompter.
