12
Using Riser Blocks
When using this TP-300 Prompter Kit you may need to use one or both riser blocks to raise the
camera up so that the camera lens is positioned vertically as near to the middle of the 60/40 Glass as
possible.
Two sets of screws are supplied for use with these riser blocks. The longer screws are for use with
two blocks and the shorter screws when using one block. In some cases the blocks are not required.
Below Lens Assembly
1. Attach/screw the tripod camera quick release plate
to the screw holes on the base of the prompter
frame,
item A
. If necessary use the adaptor screw,
item C
. Slide and secure the tripod plate, with
prompter frame on top, onto the head of tripod.
Ensure the vertical plate of the prompter frame is
facing toward the on screen talent / commentator.
2. Use the mounting bracket screw,
item D
, to secure
the mounting bracket for the tablet computer to the
front of the Prompter frame’s vertical plate.
