7
DT-NTSC-32 Manual
Chapter 2 Installation Guide
2.1 Acquisition Check
When opening the device package, it is necessary to check items according to the packing list.
It should include the following items:
• DT-NTSC-32 32 in 1 IP to Analog Modulator
• User’s Manual
• Power Cord
If any item is missing or mismatching with the list above,
please contact NACE Support at 800-688-9282.
2.2 Installation Preparation
When installing the device, please follow the below steps. The details of installation will be
described in this chapter. Users can also refer to the rear panel chart during the installation.
The main steps of the installation include:
1. Checking for possible damage during the transportation and missing contents
2. Preparing relevant environment for installation
3. Installing DT-NTSC-32 in 1 IP to Analog Modulator
4. Connecting signal cables
5. Connecting communication port (if necessary)
2.2.1 Device’s Installation Flow Chart Illustrated as follows
:
