background image

 

 

 

 

21 

 

DT-NTSC-32 Manual 

Chapter 5 Packing list 

DT-NTSC-32 32 in 1 IP to Analog Modulator  ................................................................. 1 pc 

Power Cord  ................................................................................................................. 1 pc 

Ground Cable   ............................................................................................................. 1 pc 

DATATRONIX 1-Year Limited Warranty 

DATATRONIX. (the "Company") warrants to the Original Purchaser that the item purchased is 

free from defects in workmanship or material under normal use. This warranty starts on the date 

of shipment of the hardware to the Original Purchaser. 

During the warranty period, the Company agrees to repair or replace, at its sole option, without 
charge to Original Purchaser, any defective component. To obtain service, the Original 

Purchaser must return the item to the Company properly packaged for shipping. All defective 

products must be returned to the Company within thirty (30) days of failure. Products must be 

returned with a description of the failure and Return Merchandise Authorization (RMA) number 

supplied by the Company. To receive a RMA number and a return shipping address on where to 

deliver the hardware, call 610-429-1821. The shipping, and insurance charges incurred in 
shipping to the Company will be paid by Original Purchaser, and all risk for the hardware shall 

remain with the Original Purchaser until such time as Company takes receipt of the hardware. 

Upon receipt, the Company will promptly repair or replace the defective unit, and then return 

said unit to Original Purchaser, shipping prepaid. The Company may use reconditioned or like-

new parts or units, at its sole option, when repairing any hardware. Repaired products shall 

carry the same amount of outstanding warranty as from original purchase. Any claim under the 
warranty must include dated proof of purchase or invoice. In any event, the Company's liability 

for defective hardware is limited to repairing or replacing the hardware. 

This warranty is contingent upon proper use of the hardware by Original Purchaser and does 

not cover: if damage is due to Acts of God (including fire, flood, earthquake, storm, hurricane or 
other natural disaster), accident, unusual physical, electrical, or electromechanical stress, 

modifications, neglect, misuse, operation with media not approved by the Company, tampering 

with or altering of the hardware, riot, war, invasion, act of foreign enemies, hostilities (regardless 

of whether war is declared), civil war, rebellion, revolution, insurrection, military or usurped 

power or confiscation, terrorist activities, nationalization, government sanction, blockage, 

embargo, labor dispute, strike, lockout or interruption or failure of electricity, air conditioning, or 

humidity control, internet, network,  or telephone service 

Summary of Contents for DT-NTSC-32























Reviews: