DT-IPTV-QAM-ASI-4HC | Manual V1.0 | 01152019
12
RF Setup
Output Setup
Output Setup Page of DT-IPTV-QAM-ASI-4HC
Use the Output Setup Page to setup each RF Output.
The DT-IPTV-QAM-ASI-4HC offers the integrator the ability to set the output channel independently of the other output
channels of the DT-IPTV-QAM-ASI-4HC Encoder. This professional parameter allows the integrator greater flexibility for
placing video streams within the system. Each RF/QAM (2 streams per RF) can be allocated independently.
1.
Select
RF Output Setup from the menu.
2.
Enable/Disable
RF1-RF2 by checking or unchecking Checkbox (as required).
3.
Modify
the RF TSID (as required).
4.
Select and Set
RF Type.
5.
Select and Set
Channel Type.
6.
Select and Set
Ch/Freq required.
7.
Select and Set
Attenuation (if required).
8.
Select and Set
required Constellation.
9.
Modify
Interleaver (if required).
10.
Modify
ASI TS_ID (if required)
11.
Select / Remove
any ASI Program/Stream (as required).
12.
Save and confirm
all changes have been made.
