Data Translation MACH Series, User Manual

Page: 128 / 214

Chapter 4
112
Set the Standard Controls for the Input Source (cont).
Continued from previous page.
Using
Sync
Sentinel?
No
Yes
Enable/disable Sync Sentinel with
OlFgSetInputControlValue.
For area-scan mode only, use the key
OLC_FG_CTL_SYNC_SENTINEL. The default is
enabled (True). Sync Sentinel is not used in
line-scan mode.
Set the horizontal sync insert position
with OlFgSetInputControlValue.
For area-scan mode only, use the key
OLC_FG_CTL_HSYNC_INSERT_POS. The
default is 10150 (101.5%).
Set the horizontal sync search position with
OlFgSetInputControlValue.
For area-scan mode only, use the key
OLC_FG_CTL_HSYNC_SEARCH_POS. The
default is 9500 (95.0%).
For area-scan mode only, use the key
OLC_FG_CTL_VSYNC_INSERT_POS. The
default is 11500 (115%).
Set the vertical sync search position with
OlFgSetInputControlValue.
For area-scan mode only, use the key
OLC_FG_CTL_VSYNC_SEARCH_POS. The
default is 5000 (50.0%).
Go to the next page.
Set the vertical sync insert position with
OlFgSetInputControlValue.