Data Translation DT9835 Getting Started Manual Download Page 58

Page: 58 / 62

Chapter 7

Running the Quick Data Acq Application

To run the Quick Data Acq application, perform the following steps:

If you have not already done so, power up your computer and
any attached peripherals.

Ensure that you installed the Quick Data Acq application
software from the Data Acquisition OMNI CD-ROM using the
instructions starting on

page 48

Select Quick Data Acq from the Data Translation, Inc\Quick
Data Acq program group.

Note:

The Quick Data Acq application allows you to verify basic

operations on the module; however, it may not support all of the
module’s features.

For information on each of the features provided, use the online help
for the Quick Data Acq application by pressing F1 from any view or
selecting the Help menu.

For detailed information on the supported features of the module,
refer to the DT9835 User’s Manual (see

page 13

for information on

viewing this manual).

Summary of Contents for DT9835































































Search results

Summary of Contents for DT9835

Reviews:

Related manuals for DT9835

Brands by name

Popular brands

Data Translation DT9835, Getting Started Manual

Search results

Summary of Contents for DT9835

Reviews:

Related manuals for DT9835

Brands by name

Popular brands