Chapter 2
28
3.
Click
Install this driver software anyway
.
The driver files are installed.
4.
Open the Control Panel.
5.
Double-click the
Open Layers Control Panel
icon.
6.
Select the DT330 Series board to configure, and then click
Advanced
.
7.
Select the appropriate boxes to enable interrupts for lines (bits) 0 to 7 on digital port D.
8.
When you are finished, click
Close.
9.
If you wish to change the name of the board, click
Edit Name
and enter a new name for
the board. Otherwise, exit from the Control Panel.
Once the driver is loaded, follow the instructions in
Chapter 3 starting on page 29
to wire
signals to the board.
Windows 7
Once you have installed the software from the Data Acquisition OMNI CD, installed a DT330
Series board, and powered up the host computer, the hardware is found automatically.
Perform the following steps to configure the device driver.
1.
Open the Control Panel.
2.
Double-click the
Open Layers Control Panel
icon.
3.
Select the DT330 Series board to configure, and then click
Advanced
.
4.
Select the appropriate boxes to enable interrupts for lines (bits) 0 to 7 on digital port D.
5.
When you are finished, click
Close.
6.
If you wish to change the name of the board, click
Edit Name
and enter a new name for
the board. Otherwise, exit from the Control Panel.
Once the driver is loaded, follow the instructions in
Chapter 3 starting on page 29
to wire
signals to the board.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Summary of Contents for DT330 Series
Page 5: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Page 21: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Page 53: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...