Overview
15
Supported Software
The following software is available for use with the DT330 Series boards and is provided on
the Data Acquisition OMNI CD:
•
DT330 Series Device Driver
– The device driver is installed automatically when you
install the software from the Data Acquisition OMNI CD. You need the device driver to
use the DT330 Series board with any of the supported software packages or utilities.
•
The Quick DataAcq application
–This application provides a quick way to get a DT330
Series board up and running. Using the Quick DataAcq application, you can verify the
subsystems of the board, display data on the screen, and save data to disk.
•
Calibration Utility
– The Calibration Utility allows you to calibrate the analog output
circuitry of the DT331, DT332, DT333, and DT334 boards. Refer to
Chapter 7
for more
information on this utility.
•
Measure Foundry
– An evaluation version of this software is included on the Data
Acquisition OMNI CD. Measure Foundry is drag-and-drop test and measurement
application builder designed to give you top performance with ease-of-use development.
Order the full development version of this software package to develop your own
application using real hardware.
•
DT-Open Layers for .NET Class Library
–
Use this class library if you want to use Visual
C# or Visual Basic for .NET to develop your own application software for the DT330
Series boards using Visual Studio 2003 or Visual Studio 2005; the class library complies
with the DT-Open Layers standard.
•
DataAcq SDK
– Use the Data Acq SDK if you want to use Visual Studio 6.0 and Microsoft
C or C++ to develop your own application software for the DT330 Series boards using
Windows XP, Windows Vista, or Windows 7; the DataAcq SDK complies with the
DT-Open Layers standard.
•
DTx-EZ
– DTx-EZ provides ActiveX controls, which allow you to access the capabilities of
the DT330 Series boards using Microsoft Visual Basic or Visual C++; DTx-EZ complies
with the DT-Open Layers standard.
•
DAQ Adaptor for MATLAB
– Data Translation’s DAQ Adaptor provides an interface
between the MATLAB Data Acquisition (DAQ) subsystem from The MathWorks and
Data Translation’s DT-Open Layers architecture.
•
LV-Link
– An evaluation version of LV-Link is included on the Data Acquisition OMNI
CD. Use LV-Link if you want to use the LabVIEW graphical programming language to
access the capabilities of the DT330 Series boards.
Refer to the Data Translation web site (www.
mccdaq
.com) for information about
selecting the right software package for your needs.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Summary of Contents for DT330 Series
Page 5: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Page 21: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Page 53: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
