Data Translation DT3010 Series, Getting Started Manual

Page: 40 / 142

Chapter 4
30
Figure 5: Attaching the DT740 Screw Terminal Panel to the
DT3010, DT3010/32, DT3010/32-268, or DT3016 Board
Attaching the STP268 Screw Terminal Panel
The STP268 screw terminal panel is provided for accessing the signals
of the DT3010-268 board. If you are using both connector J1 on the
DT3010-268 board, which allows access to most of the functionality of
the board, and connector J2 on the DT3010-268 board, which allows
access to the dynamic digital outputs, digital I/O port B, and
counter/timers 2 and 3 of the board, you need two STP268 screw
terminal panels.
The EP325 cable, which is provided as an option for the STP268 screw
terminal panel, attaches the STP268 to either connector J1 or to the
free end of cable EP324, which is attached to connector J2 (refer to
page 18 for more information on attaching the EP324 cable to
connector J2).
Figure 5 illustrates how to attach STP268 screw terminal panels to the
DT3010-268 board.
DT3010, DT3010/32,
DT3010/32-268, and
DT3016 Board
Analog I/O
Connector (J1)
Digital I/O
Connector (J2)
EP307 Cable
EP308 Cable
J1
J2
DT740 Screw
Terminal Panel