Data Translation DT3010 Series, Getting Started Manual

Page: 27 / 142

Installing the Board and Loading the Device Driver
17
3
3
3
3
3
3
3
3
3
Removing the Board for Handling
To remove the board for handling, be sure to follow these steps:
1. Discharge any static electricity by holding the wrapped board in
one hand while placing your other hand firmly on a metal
portion of the computer chassis.
2. Carefully remove the antistatic packing material from the board.
(It is recommended that you save the original packing material in
the unlikely event that your board requires servicing in the
future.)
3. Hold the board by its edges and do not touch any of the
components on the board.