Data Modul PCM-9375 User Manual Download Page 45

Page: 45 / 111

Chapter 3

3.2.7 PnP/PCI Configurations

NOTE:

This “PnP/PCI Configurations” option is setting up the IRQ and

DMA (both PnP and PCI bus assignments.

• PNP OS Installed [No]

This item allows user to determine PNP function install or not.

• Init Display First [Onboard]

This item is setting for start up Video output from Onboard or PCI

device.

• Reset Configuration Data [Disabled]

This item allow user to clear any PnP configuration data stored in the

BIOS.

• Resources Controlled By [Auto (ESCD)]

- IRQ Resources
This item allows you respectively assign an interruptive type for IRQ-

3, 4, 5, 7, 9, 10, 11, 12, 14, and 15.

- Memory Resources
This item allows you respectively assign a memory block from N/A to

DC00.

• PCI VGA Palette Snoop [Disabled]

The item is designed to solve problems caused by some non-standar d

VGA cards. A built-in VGA system does not need this function.

Data Modul AG - www.data-modul.com

Summary of Contents for PCM-9375
















































































































Search results

Summary of Contents for PCM-9375

Reviews:

Related manuals for PCM-9375

Brands by name

Popular brands

Data Modul PCM-9375, User Manual

Search results

Summary of Contents for PCM-9375

Reviews:

Related manuals for PCM-9375

Brands by name

Popular brands