Data Modul PCM-9375 User Manual Download Page 38

Page: 38 / 111

PCM-9375 User Manual

3.2.4 Advanced Chipset Features

NOTE:

This “Advanced Chipset Features” option controls the configu-

ration of the board’s chipset, this page is developed by Chipset indepen-
dent, for control chipset register setting and fine tune system
performance. It is strongly recommended only technical users make
changes to the default settings.

• CPU Frequency [Enabled]

This item enables users to set the CPU Host clock by system automatic

detection or by manual.

• Memory Frequency [400 MHz] (Show Only)

This item enables users to set the Memory Host clock by system auto-

matic detection or by manual.

• Video Memory Size [8 M]

This item allows user to adjust VGA share memory size for personal

purpose.

• Output Display [CRT]

This item allows user to choose screen display of type. Bios default

value is set to “CRT”.

• Flat Panel Configuration [Press Enter] (Show Only)

This item is provided Flat panel function for user to adjustment.

• Onboard Audio [Enabled]

This item is controller to enabled or disabled motherboard of audio

device.

Data Modul AG - www.data-modul.com

Summary of Contents for PCM-9375
















































































































Search results

Summary of Contents for PCM-9375

Reviews:

Related manuals for PCM-9375

Brands by name

Popular brands

Data Modul PCM-9375, User Manual

Search results

Summary of Contents for PCM-9375

Reviews:

Related manuals for PCM-9375

Brands by name

Popular brands