PCM-9375 User Manual
14
2.6 IDE, CDROM hard drive connector (CN11)
The board provides 1 IDE channels which you can attach up to two
Enhanced Integrated Device Electronics hard disk drives or CDROM to
the board’s internal controller. Its IDE controller uses a PCI interface.
This advanced IDE controller supports faster data transfer, PIO mode 3,
mode 4 and up to UDMA33.
2.6.1 Connecting the hard drive
Connecting drives is done in a daisy-chain fashion. This package includes
One 44PIN IDE cable that can connect to 1.8" and 2.5" drives.
1.
Connect one end of the cable to Hard Drive connector. Make sure
that the red (or blue) wire corresponds to pin 1 on the connector,
which is labeled on the board (on the right side).
2.
Plug the other end of the cable into the Enhanced IDE hard drive,
with pin 1 on the cable corresponding to pin 1 on the hard drive.
(See your hard drive’s documentation for the location of the con-
nector.)
2.7 Solid State Disk
The board provides a CompactFlash™ card type I socket and type II for
optional kit.
2.7.1 CompactFlash (CN10)
The CompactFlash card shares a primary IDE channel and set it as the
master.
2.8 Parallel port connector (CN17)
Normally, the parallel port is used to connect the card to a printer. The
board includes a multi-mode (ECP/EPP) parallel port accessed via CN17
and a 26-pin flat-cable connector. You will need an adapter cable if you
use a traditional DB-25 connector. The adapter cable has a 26-pin connec-
tor on one end, and a DB-25 connector on the other.
The parallel port is designated as LPT1, and can be disabled or changed to
LPT2 or LPT3 in the system BIOS setup.
The parallel port interrupt channel is designated to be IRQ7.
You can select ECP/EPP DMA channel via BIOS setup.
Data Modul AG - www.data-modul.com
Summary of Contents for PCM-9375
