background image

DATA-LINC GROUP

29

SRM6200E-SLC User’s Guide

PN 161-09990-002C

rev 3/29/04

Technical Support

Data-Linc Group maintains a fully trained staff of service personnel who are capable of providing complete product
assistance. They can provide you with technical, application and troubleshooting, spare parts and warranty assistance. Our
technical staff is based in Bellevue, Washington USA and may be reached at (425) 882-2206 or e-mail
[email protected]

Product Warranty

Data-Linc Group warrants equipment of its own manufacture to be free from defects in material and workmanship for one year
from date of shipment to original user. Data-Linc Group will replace or repair, at our option, any part found to be defective.
Buyer must return any part claimed defective to Data-Linc Group, transportation prepaid.

Return Material Authorization

If a part needs to be sent to the factory for repair, contact Data-Linc Group’s corporate office and request a Return Material
Authorization (RMA) number. The RMA number identifies the part and the owner and must be included with the part when
shipped to the factory.

Contact Information

Corporate Office

Data-Linc Group
3535 Factoria Blvd. SE
Suite 100
Bellevue, Washington 98006 USA

Telephone: (425) 882-2206
Fax: (425) 867-0865
E-mail: [email protected]
Web site: www.data-linc.com

Summary of Contents for SRM6200E-SLC
































Reviews: