■ List of Steps to Start a Job
≡
Setting Media and Options—the Setup Window
PSV5000 Operator’s Manual
- 59 -
If your desired input media (tape or tray) does not display
on the
Options
tab, the winAH400.ini file may need to be edited. See
the online Help for instructions editing the WinAH400.ini file or contact
Data I/O Customer Support or a local Data I/O approved service
representative.
Verifying Media Setup
1.
At the
Setup
window, click the
Job Info
tab.
2.
Verify that all the information displayed for this job is accurate.
Figure 66:
The Job Info Tab is a read-only review of information, with the
exception of the editable Pass Limit field.
3.
(Optional) Change the Pass Limit (number of devices to program)
—
At the
Job Info tab, click the in Pass Limit field and enter the new Pass Limit
value and click OK.
