Running a Job on PSV5000 ■ List of Steps to Start a Job
- 56 -
Data I/O ■ 096-0466-001E
9>>
(Optional) Preselecting Programmers
The PSV5000 can be configured with up to six FlashCORE programmers, five
LumenX programmers, or a combination of the two.
For efficiency, shut off programmers that are not used for a particular job:
1.
At the CH700 Main window, click Preselect
Programmers
. Refer to Figure
64: below.
2.
Click
I
(green side) of the Unlock Cnf button to allow changes.
3.
For each programmer, click
I
(green side) of the button to enable it or the
O
(red side) to disable it.
If a programmer does not have a Socket Adapter, or an
incorrect Socket Adapter is installed, the programmer will automati-
cally be disabled.
It is NOT necessary to restart programmers between jobs.
Figure 64:
Preselect Programmers has been clicked. In this image, pro-
grammers 1 through 4 are disabled.
4.
Lock the configuration again
only if you wish to keep this setting the
next time the system is turned on
by clicking the O (red) side of the
Lock Cnf button.
