Data General AViiON 530 Series, Customer Documentation, Page: 94 / 266

Using the SCM Configuration Menus
5-10
014–002091
Change baud rate
1 300
2 600
3 1200
4 2400
5 4800
6 9600
7 19200
8 Return to previous screen
Current baud rate [9600]
Enter choice(s)–>
Type the item number of the baud rate you want and press New Line. You return to
the Change Console Parameters menu. The baud rate you select will be the default for
your system console port the next time you power up or reset the system.
Changing the System Console Character Length
While in the View or Change System Configuration menu, type and press New Line
to select item 2 Change console parameters." The system displays the Change
Console Parameters menu, with the current value in brackets next to item 2, Change
character length". Use item 2 to change the default character size for your system
console port. The default value is 8 data bits, no parity.
NOTE: Item 2 applies only if you are using an asynchronous terminal as system
console; this parameter does not apply to a graphics monitor.
Change console parameters
1 Change baud rate [9600]
2 Change character size [8 bit, no parity]
3 Change asynch console mode [ANSI]
4 Change flow control [Enabled]
5 Change console language [US English]
6 Change screen saver timeout [15 minutes]
7 Return to previous screen
Enter choice(s) –>
2 Change character length [8 bits, no parity]
Type and press New Line to select item 2, Change character length." The system
displays the Change Character Size menu.