HSS001 Quick Start Guide
11
4.
Select
Save As
from the
File
menu. Verify that the name hosts appears in
the
File Name
field and click
OK
.
Verify Connection to HSM
After the hosts file has been created and saved, use the ping command to verify
that your computer can connect to the Hyper SCADA Server using the
assigned host name.
1.
On the Windows taskbar, click the
Start
button, and then click
Run
.
2.
Type
ping ht3
in the
Run
dialog box and click
OK
.
3.
A DOS window appears on screen and indicates if a reply has been
received from the Hyper SCADA Server. A message similar to "Reply from
xxx.xxx.xxx.xxx: bytes = 32 time < 1 ms TTL = 64" (where xxx.xxx.xxx.xxx
represents the Hyper SCADA Server's IP address) indicates that the HSS
responded.
Connect to HT3
Modify Browser Settings
Several changes must be made to Internet Explorer's security settings before
you can successfully run HT3.
1.
Start Internet Explorer.
2.
Select
Internet Options
from the
Tools
menu.
3.
Click the
Security
tab and select the
Local intranet zone
.
4.
Click
Custom Level
.
5.
In the
Security Settings
dialog box, enable the following:
All of the options listed under
ActiveX controls and plug-ins
.
All of the options listed under
Cookies
.
6.
Click
OK
at the
Security Settings
dialog box.
7.
Click
OK
at the
Internet Options
dialog box.
Install Plug-Ins and Java Policy File
1.
Start Internet Explorer and type
ht3
in the
Address
box.
2.
If the necessary plug-ins are not already installed, the HT3 Plug-Ins page is
loaded. (
Note
: If the HT3 Plug-Ins page does not automatically load, type
http://ht3/ht3/plugins/index.html
in Internet Explorer's Address box.)
3.
Follow the instructions on the page to install the required HT3 files and
plug-ins.
