WebPoster
52
13. WebPoster
Connections and controls
WebPoster are POS-Line IQ Onatrio devices with a special firmware, so the ports and operating in the „IQ Ontario“ must be observed.
Connecting a mouse and keyboard is not supported with this firmware.
Functional description
The Industrial HTML Full HD Player is a complete solution for viewing Web pages. The website can be configured via a web interface.
At the start of the device is automatically display.
Configuration of the media player on delivery (factory configuration)
This device is a LAN (Ethernet) enabled device. Please note that an incorrect network configuration the device may affect the safe
operation of the entire network and in the worst case of a network failure leads. To set up the device for a specific network, you need
the key operating parameters of the network be known. The POS Line WebPoster is shipped from the factory with the following con
-
figuration:
• DHCP: on
• IP-Address: 192.168.0.1*
• Netmask: 255.255.255.0
• Hostname: WebPoster-xx-xx-xx (the last 6 bytes of the MAC address of the device)
• Login Name: Artista
• Password: Artista
*If no DHCP server is found, this IP address is assigned automatically.
Supported site formats
• HTML5
• JavaScript
Software
On the enclosed disk contains the following software and related documentation.
ADF:
A program that simplifies the installation and configuration of HTML players. Connect any HTML player in the factory configu
-
ration to the network and start ADF. It displays all the HTML players in a list. Select the devices one by one and remove the network
configuration.
Configuration of the media player
The configuration of the HTML player can work with any standard web browser (Firefox, Internet Explorer, Chrome, etc.) are performed.
Connect the HTML player to a network and enter to establish the connection URL (eg. as IP address or network name) in the browser.
Now open the WEB interface. If you are prompted for the password, enter the password (factory setting: Login name: Artista; pass
-
word: Artista).
Layout of the web interface::
Configuration
Network Configuration:
The configuration of the network is the first step in setting up.
Submit Configuration:
With Submit Configuration the entries will be accepted.
Discard Changes:
With Discard Changes be deleted entries in the fields.
However, this has no influence on the current configuration.
Browser Settings:
The configuration of the Web page to display is the second step of the device.
Here the web page can be entered and a „Reload Interval (seconds)“ can be defined.
Submit Configuration:
With Submit Configuration the entries will be accepted.
Discard Changes:
With Discard Changes be deleted entries in the fields.
Change Password:
Here, the default password can be changed.
