manualshive.com logo in svg

Data Display Group DS-91-981, User Manual

Share
Download
Data Display Group DS-91-981 User Manual Download Page 33

POS-Line IQ Intel Atom

33

Mounting and dismounting the PC box

Note: The display must be switched off before dismounting or mounting the PC box. Not confirming to the rules may electron

-

ically damage the display and the PC box.

To remove the PC box please proceed as follows:

• 

Make sure that the display is completely disconnected from power. Unplug the power cable or switch the monitor off with the main 

power on/off switch.

• 

Remove the safety screw (1) from the PC box .

• 

Pull carefully at the handle of the PC box (2) and lift the PC box from the bolts.

To mount the PC-box please proceed as follows:

• 

Make sure that the display is completely disconnected from power. Unplug the power cable or switch the monitor off with the main 

power on/off switch.

• 

Carefully plug the PC box into the connectors.

• 

Fasten the PC box with the safety screw.(1).

(1) safety srew

(2) handle

Summary of Contents for DS-91-981


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands