POS-Line IoT
51
Connecting a signal source using a HDMI-DVI cable
Switch on/ off
After the supply voltage has been applied, the IoT monitor starts automatically. To switch off, you must select „Shut down“ in the
operating system.
Operating systems
The IoT Monitor comes with the operating system Raspbian, which is equipped with all necessary drivers. This operating system is the
official version of the community, reduced to the internal memory of the compute module. It is only used for the first commissioning of
the monitors.
The IoT Monitor can be equipped and programmed by the customer with its own operating system/ image. For this, the USB port on the
back of the monitor in the connection cover can be used, which is located under the OSD menu.
A guide for the integration of an image can be found on the enclosed DVD or on our homepage:
https://www.datadisplay-group.de/en/products/tft-controller/iot-industry-40-raspberry/
In the community of Raspberry
®
Pi (
https://www.raspberrypi.org/forums/
) you can find many problem-solving and help to integrate and
create your own system.
HDMI
DVI
