background image

dCS 

Vivaldi Upsampler User Manual 

Software Issue 1.2x 

 

December 2015 

  

 

Vivaldi Upsampler Manual v1_2x 

Page 26 

English version 

 

R

EAR 

P

ANEL

 

 

 

 

Figure 9 – Rear panel 

 

Digital Outputs 

All of the outputs consistent with the selected output mode are active at the same time. 

!

 

The Vivaldi Upsampler generates 24-bit PCM data but it does not have facilities to 
reduce the word length to less than 24 bits. It will not give good results with older DACs 
(or other equipment) that cannot process 24-bit data. ALL 

dCS

 converters will accept 24-

bit PCM data. 

The 

AES1

 and 

AES2

 outputs (J) can be used individually at 32, 44.1, 48, 88.2, 96, 176.4 or 192kS/s 

or DSD/64 in DoP format, or as a Dual AES pair at 88.2, 96, 176.4, 192, 352.8 or 384kS/s or DSD/64 
in DoP format.  

!

 

For Dual AES operation at 88.2, 96, 176.4 or 192kS/s or DSD, the 

Settings > Dual AES

 

menu page must be set to 

Dual AES On

, otherwise both outputs will carry single AES 

data. If the output rate is 352.8 or 384, Dual AES mode is automatically selected. 

2 SPDIF outputs are provided, 

SPDIF1

 on an RCA connector (K) and 

SPDIF2

 on a BNC connector 

(L). These outputs carry SPDIF data for output rates at 32, 44.1, 48, 88.2, 96, 176.4 or 192kS/s or 
DSD/64 in DoP format, even if 

Dual AES

 mode is 

On

. They are disabled when the Output mode is 

352.8kS/s or 384kS/s. 

 

Digital Inputs 

The standard PCM inputs are 

AES

 on a 3-way female XLR connector (M), 

SPDIF1

 & 

SPDIF2

 on RCA 

connectors (N), 

SPDIF3

 on a BNC connector (O) and 

SPDIF4

 on a Toslink connector (T). The 

electrical inputs will accept up to 24-bit data at 32, 44.1, 48, 88.2, 96, 176.4 or 192kS/s or DSD/64 in 
DoP format. The Toslink input accepts data at up to 96kS/s and is not tested or guaranteed at higher 
sample rates. 

The 

SDIF

 interface will accept PCM data at sample rates up to 96kS/s. The interface consists of two 

data inputs labelled 

CH1

 and 

CH2

 (P). Operation in SDIF mode requires that a word clock from the 

source is connected to the 

Word Clock In1

 or 

In2

 connector (Q). Note that the interface can fail to 

lock correctly if the data sample rate changes but the Word Clock does not. 

 

J

K

L

M

--N--

--P--

U V W

O    Q     R  

 

 S      T      X

Y

Z

Summary of Contents for DCS VIVAlDI












































Reviews: