17
2. In the opening page of the App press the (settings)
button.
3. Find and tap the
Park Mode
setting.
4. Set your required G Sensor sensitivity for Park Mode.
7�2�8� G SENSOR
The
G Sensor
setting sets the sensitivity needed to trigger an
emergency recording. It is recommended that you customise
this setting when you first use the DSH-882 as different
vehicles will require different sensitivities (smaller vehicles
require lower sensitivities; larger vehicles require higher
sensitivities).
To set the
G Sensor
setting please follow the steps below.
1. Connect your smart device to the DSH-882 using the
instructions laid out in the
WiFi Connection
section of this
manual.
2. In the opening page of the App press the (settings)
button.
3. Find and tap the
G Sensor
setting.
4. Pick your required setting.
7�2�9� MOTION DETECTION
Motion Detection
will stop recording when no movement is
detected in front of the camera, and resume recording when
the action resumes conserving space on your Micro SD Card.
To set
Motion Detection
please follow the steps below.
1. Connect your smart device to the DSH-882 using the
instructions laid out in the
WiFi Connection
section of this
manual.
2. In the opening page of the App press the (settings)
button.
3. Find and tap the
Motion Detection
setting.
4. Pick your required setting.
