Multiconn Srl
Pag. 23 of 23
DAS-M44HDCI -CAN- User Manual (EN)
PROBLEM
POSSIBLE REASON
SOLUTION
There are 2 grey bars
on the 2 edges on the
screen
The 2 bars of stored channels have
been activated from configuration
menu
Deactivate the 2 bars from menu:
Refer to manual at pag.12
Loss of channels in “TV
list”
Poor digitalized area
Please memorize the preferred
channels
“Error” appears on the
initialization mode
Unit damaged
Possible impact/crash suffered by
receiver.
After having switched off
the car the LED of
antennas keep on
The stand-by scan system is active
Deactivate the function on
configuration menu.
Refer to manual at pag.12
Memo signal while
watching a channel from
“TV list”
The channel has not been
memorized in the MEMO TV channel
list.
It advise users to do it
Deactivate the function from the
configuration menu.
Refer to manual at pag.12
The unit does not show
PAY TV channels
The receiver is not CI version
The receiver without CI option
does not support pay TV channel
vision.
The CAM module and CARD has not
be inserted
Insert the cam and card
The CARD is not habilitated on that
channel vision
Replace the card with another one
habilitated. The unit does not
support CI+ card
Incorrect configuration of the CAM
Take out CAM + card and insert
them after having selected a pay
TV channel from TV list
If problem persists, please contact the dealer where you bought the unit for assistance.
Summary of Contents for DAS-M44HD-CI-CAN
Page 1: ......
