ANNEX II : DASnet cables
31
1 Orange-White Audio+ 2
2 Orange Audio- 3
3 Green-White Audio Earth 1
4 Blue
5 Blue-White
6 Green Data Earth 1
7 Brown-White
Data- (A) 3
8 Brown Data+ (B) 2
etherCon
XLR
Manual del Usuario
/ UX series /
User’s Manual
With each system,
cabling and patch panels are provided
. It is very important to use the
system with the intended cables to prevent electromagnetic interferences between the analog
audio signal, the DASnet data and the power. Be sure to check the specifications provided
by the cable manufacturer. It is also especially important when installing connectors yourself,
to note that when termination is not accurate, a cable will be unable to achieve its maximum
performance and could have interferences.
There are 4 different types of cables:
- The main feeds which include power and a STP, CAT7 cable. These cables are
named
eCP_xx
(xx refers to cable length, and the standard values are 3m or 20m).
- The links between cabinets (aero40A/Convert15A/LX-218CAnet), which are STP
CAT7 cables. Cable code
eC_09
- Power Links between cabinets.Cable code
Plink1_09
- Links for RoadNet series. Power+STP CAT7. eCPk_1/eCPk_5
AL Shield
2
2
ecP_xx: Power cable 3x2,5mm + CAT7 4x (2 x 0,14mm )
Jacket
Jacket
The main feed cable eCP_xx has
the following structure:
STP CAT 7 cable with Aluminium
Shield for each individual pair and a
main aluminium Shield.
The main Shield has to be soldered to
the etherCon housing.
The eC_09 cable is a CAT5e cable with
global Aluminium Shield.
Important
The pin out of the EtherCon to XLR is the following on the eCP cables:
