5
SARA manual / SARA - SUB
3.- Assembly of a SARA-SUB unit on its transport platform, PL-SARA-SUB.
Disassembly
Fig.1
Only use the PL-SARA-SUB accessory
(WLL 160kgf) shown in the figure to
stack and transport up to 3 units of
SARA-SUB.
Fig.2
Place the SARA-SUB unit on the
platform aligning its feet with the marks
on the platform.
Fig.3 y 4
Note that the first unit is not attached to
the platform with security pins, however,
subsequent units need to be attached
to each other. Once a unit has been
stacked on top of another unit, insert
the (2) security pins on both sides at the
front, as shown in figure 4.
Fig.5, 6 y 7
Next, remove the security pin from the
rear plates, lower the rear connecting
rod and attach it with the previously
removed security pin, as shown in the
figure. The result can be seen in figure 7.
*To stack a third unit, follow the above
described steps
**To disassemble, follow the steps above
in reverse order
Fig.1
Fig. 2
Fig.3
Fig.4
Fig.6
Fig.5
Fig.7
