17
SARA manual / SARA - SUB
Fig.1
The AX-SARA can be used as well to rig
SARA-SUBs. In order to do this, three
quick release pins (of the Sub) will be
used; two at the front and one at the rear.
Before approaching the AX-SARA to the
Sub unit, proceed to “free” the rear rod of
the AX-SARA by removing the rear pin as
shown in the figure.
Fig.2
Lower the rigging accessory and place it
close to the subwoofer unit.
Fig.3
To attach the accessory to the SARA-SUB
use three pins, two at the front and one
at the rear as shown in the details.
9.- Assembly of AX-SARA on SARA-SUB. Max number of units
Fig.1
Fig.2
Fig.3
