Darwin Fitness DF-INVERSION, Assembly And Operating Instructions Manual, Page: 21 / 36

21
3.2 Adjusting the Angle
The angle is adjusted by inserting or removing
the angle control bar (15) on the u-shaped
holders on the rear frame (8):
⚠
WARNING
When inserting the angle control bar (15),
make sure that the pins of the bar (15) are
in the slots of the holders.
+ Upper position:
max. inversion angle of 32°
+ Middle position:
max. inversion angle of 40°
+ Lower position:
max. inversion angle of 45°
+ Remove the bar:
max. inversion angle of 75°
3.3 Adjusting the Body Height
The equipment can be adjusted to a body height of up to 1.98m. To use the equipment optimally and
safely, check the height adjustment before use.
1. Loosen the knob (38) on the back of the backrest frame (2).
2. Hold the adjustable boom (3) and slightly pull out the spring knob (41) on the backrest frame (2).
3. Hold the position of the spring knob (41) to move the adjustable boom (3) in the housing of the
backrest frame (2) until you have reached the desired height at the mark.
4. Let the spring knob (41) engage at the
desired position so that the spring knob
(41) returns to its initial position.
⚠ WARNING
To avoid risk of injury, make sure that the
spring knob (41) is properly engaged.
5. Tighten the knob (38).
6. Place the lumbar pad in a suitable
position for your height and fix the
lumbar pad with the Velcro strip.