Multi H
Phillips
Hex Tool w
s Screwdri
1PC
with
iver
(5
Phi
Pre-Inst
55) Self-Ta
llips Scre
talled Ha
apping
ew 2PCS
ardware:
D
17
Step 7:
Assembly of the front heel holders
1. Remove the pre-assembled screws (55) from the front rod (13).
2. Slide the front rod (13) thorugh the hole of the ratchet handle (11) and align the drill holes.
3. Fix the front rod (13) to the ratchet handle (11) using the previously removed two screws (55)
and tighten the screws.
4. Insert the rubber heel holder (14) into the steel brackets (7).
5. Gently press the steel brackets (7) with the rubber heel holders (14) together.
6. Slide the steel brackets (7) with the safety tooth facing away from the adjustable boom (3) onto
the rod (13), see fig. D.
7. Let the safety tooth of the steel bracket (7) engage into the groove of the rod (13), see fig. D.
⚠
WARNING
To prevent the heel holders from slipping off, make sure that the safety tooth of the steel
brackets (7) are engaged into the respective groove on the rod (13).
Summary of Contents for DF-INVERSION
