SPT100 USER’S GUIDE
Copyright © 2011 Darim Vision Co, All Rights Reserved
14
3.3 Settings page
You can specify the main video settings for dual streaming using the
Settings
page as shown in
Figure 8.
The first group of the parameters is intended for the primary H.264 encoding channel adjusting.
Set the required values for the encoder resolution using the
Encoder mode
dropdown list. The
Framerate
dropdown list allows selecting a desired frame rate. Move the
Bitrate
slider for
specifying the appropriate video bit rate within the available range. Choose one of the available
values for the
Flip
parameter (depending the mount camera installation to turn the video image
from the camera).
The Secondary channel encodes H.264 enabled with the constant 320x240 resolution. The frame
rate and bit rate parameters can be set as required.
Figure 8. Settings page view
Clicking the [
Apply
] button will save each section changes to Non-Volatile RAM and restart all
services.
