SPT100 USER’S GUIDE
Copyright © 2011 Darim Vision Co, All Rights Reserved
11
Windows 7:
Start
à
Control Panel
à
Network and Sharing center (refer to Figure 5)
à
LAN
à
Properties
à
click Internet Protocol Version 4
à
Press the [
Properties
] button
à
select [Use the following IP address], type in the IP address the same as the SPT100
camera you are going to connect, but the last digit is different, e.g. it can be
192.168.1.2, Subnet mask 255.255.255.0. Press the [
OK
] button and press the [
Close
]
button.
Windows XP:
My Network Places
à
right mouse click
à
Properties
à
right mouse click on proper
LAN Adapter
à
Properties
à
select Internet Protocol (TCP/IP) from the list
à
press
the [
Properties
] button
à
select [Use the following IP address]. Type in the IP
address the same as the SPT100 camera you are going to connect, but the last digit is
different, e.g. it can be 192.168.1.2, Subnet mask 255.255.255.0. Press the [
OK
]
button and press the [
Close
] button.
Figure 5. Changing IP settings
