DARAY V402+ Operating Manual Download Page 29

29 

Returns Policy 

 

 
 

 

 

We want you to be completely satisfied with your purchase. If you need to return goods 

purchased from DARAY Ltd, please read the following information carefully. 
 
The DARAY Ltd returns policy provides guidance on when you can return goods we have 
supplied, and what you can expect from us once you do. To see our detailed returns policy 
and procedure visit www.daray.co.uk/returns 

 

TYPE OF RETURN 

REMEDY 

DAMAGED GOODS OR DOA* 
Goods which are physically damaged on 

delivery, or which do not function. 

We must be notified within 24 hours of receipt. 

GOODS DEVELOPING A FAULT 
Goods which have developed a fault 
within the warranty period. 

Within 14 days of delivery we will replace the item 
as DOA*. 
If the fault develops after 14 days, but within the 

warranty period, we will initiate the returns 
procedure. 

NON WARRANTY 
Goods which have developed a fault 
outside the warranty period. 

If a fault develops outside the warranty period, we 
will initiate the returns procedure. 

OTHER 
Any situation which is not covered by 
the above. 

We will try to help, but we cannot normally offer a 
refund. 

 
*DOA – dead on arrival 
 
For additional clarification, please refer to our terms and conditions at 
www.daray.co.uk/terms

In a small number of cases, we may determine that a replacement would not work any 

better than the original product we supplied. In such cases we will only offer a refund 
rather than a replacement for qualifying returns.  

Replacement bulbs are not eligible for returns, unless they are faulty or damaged. 

Spare parts ordered on our website or from supplied part codes are not be eligible for 
credit. We will accept returns and exchange for the correct item. 

If you have incorrectly ordered a product and it is unopened and in perfect condition, within 
seven days of the original order you may order the correct product and receive a full credit 
for the returned item. In all other cases, items returned for credit are subject to a 25% 
restocking fee. 

If you send us goods that do not qualify for return, you will invalidate your claim to any 
refund, and you will be obliged to compensate DARAY Ltd for the cost of return postage and 

any other reasonable costs incurred processing the goods. 

Your statutory rights are not affected. 

IMPORTANT!

 

Before returning your item, you must call us on 0870 199 4299

 

Summary of Contents for V402+





































Reviews: