16
4.5.2 Description of Information Displayed
No Description
Remarks
1
SPO2
Arterial oxygen saturation.
2 SPO2
measurement The current SPO2 measurement indicated by the time
indicator.
3 PR
Pulse
rate
4
PR measurement
The current PR measurement indicated by the time indicator.
5 TEMP
Temperature
6 TEMP
measurement The current TEMP measurement indicated by the time
indicator.
7
SPO2 waveform
SPO2 trend waveform plot - data is stored in memory
8
PR waveform
PR trend waveform drawn plot - data is stored in memory
9
TEMP waveform
TEMP trend waveform drawn plot - data is stored in memory
10 Time
indicator
It is the scale indicator of the horizontal axis and the unit
indicator of the storage area.
11
Date and time
It shows the moment indicated by the time indicator.
12
Storage area ruler
It shows the total size of the trend data storage area.
13 Page
indicator
The data forming one screen trend waveforms (time period of 3
hours) is defined as a page, which corresponding to 90 units of
the storage area. The page indicator points out the position of
this data segment of this page.
14 Vertical
axis
It is the parameter measurement axis. It is divided into 3
segments which isSPO2 axis, PR axis and TEMP axis from top to
bottom. The terms on its left side mark the names of these
three axes.
15 Horizontal
axis
It is the time axis. Its minimum scale is 2 seconds and whole
length is 3 hours. The current moment is at the right end of it
and time moves forward in the left direction.
NOTE
•
Obtaining stable measurements always needs a period of time. When the monitor is
powered on or the sensors are connected, the trend data may appear sudden change or
transit because of the transition period. The measurements in this period can not be
used as diagnostic basis.
•
When time indicator points to the time period without monitoring, the displays of
measurements and the corresponding times are blank because nothing is saved.