DARAY SL720, Installation Manual, Page: 8 / 20

Page 7 of 17
3. Operation
Position the light by moving it using the handle provided on the main stand.
Note: The light must not be lifted using the light-head handle or gooseneck. To position the
light, hold the upstand and move the light-head using the handle.
The front castors on the base have brakes which can be used to help keep the base from moving
whilst the light-head position is adjusted.
Unwrap the flex from the cable holders and plug the IEC connector into the base ensuring the
metal safety retainer is fitted over the top of the IEC plug connector.
Once connected to the mains, switch the illuminated power switch ON and the green indicator
will be illuminated. If the indicator does not illuminate, check the power supply and then check
the fuses located in the IEC socket on the mobile base (see section 4.4 FUSE REPLACEMENT)
and also in the mains plug. Further fault investigation should only be carried out by a qualified
electrician.
3.1 Turning the light ON/OFF and adjusting the intensity
The SL720 uses a single button (on the side of the head) to power the light on and off.
Next to this switch are four buttons split into paired controls for variable intensity (LUM –
Luminance) and colour temperature (TEM – Temperature); press the + button to increase light
intensity or colour temperature and press the – button to decrease them.
The lighthead can be rotated on the flexible arm which itself can be bent almost double so the
light patch may be directed at will.
IEC mains
connector
Safety
retainer
Illuminated
power switch