
Page 19 of 35
4.1.7 Arm installation
To ensure the smooth rotation of the arm, it is essential
that the primary arm spigot is lightly lubricated before
being inserted into the boot of the downtube.
Place the white nylon washer over the primary arm
spigot. Using the sachet of silicon grease provided,
lubricate the indicated sections of the arm spigot.
Whilst inserting the arm spigot into the downtube boot,
feed the cable connection through the bottom of the
boot.
Join the connector from the arm system to the
connector from the downtube.
Then sit the connection inside one of the supplied bungs and insert the bung into the
bottom of the downtube.
Lu
bri
cate
Summary of Contents for EXCEL
