DARAY BH200, Operating & Installation Manual

Page: 4 / 24

Page 3 of 20
1. Introduction
DARAY’s BH200 LED is a state-of-the-art, low-cost patient light. The light uses the
latest next-gen LED technology with no heat in the light beam.
The BH200 LED head swivels on a flexible arm to allow accurate and stable
positioning of the light patch. Its head and handles are coated with DARAY’s
BioProtect™, an antimicrobial protection against bacteria such as MRSA. Wall or rail
mountings are available.
The light comprises 3 parts: light head and flexible arm system, power-supply
module, and the mount of choice. The flexible arm allows the light patch to be
placed accurately and stably where it is needed. The arm is covered with a PVC
sleeve to prevent contamination and to allow easy cleaning.
The plug-in power-supply module contains an electronic transformer to provide a low
voltage to power the light from the electrical mains.
The wall-mounting bracket provides a simple method of fixing the light to the wall,
allowing the base of the arm to swivel in front of the wall; a screw prevents the arm
from accidentally being pulled out of the bracket.
The rail-mount version features a clamp to fasten the light to a medical equipment
rail which is optionally supplied in 1m lengths. The clamp can also be used to mount
the light to a bed or trolley rail.
All versions are delivered in special-to-type packaging which identifies on the ends of
the box the model type and serial number of the light within.
This user & installation guide contains all the information you need for installation,
operation and maintenance.
Restrictions and Liabilities
Information in this document is subject to change and does not represent a
commitment by DARAY. Changes made to the information in this document will be
incorporated in new editions of the publication. No responsibility is assumed by
DARAY for the use or reliability of software or equipment that is not supplied by
DARAY.