Chapter 1
Introduction
SCXI-1102/B/C User Manual
1-2
©
National Instruments Corporation
selectable gain of 1 or 100. You can multiplex the SCXI-1102C inputs
to a single output, which drives a single DAQ device channel.
The SCXI-1102/B/C modules operate with full functionality with the
National Instruments MIO, Lab-PC+, PCI-1200, DAQCard-1200, and
SCXI-1200 modules. You can use the PC-LPM-16 board and the
DAQCard-700 with the SCXI-1102/B/C, but these devices cannot scan
the module; they can only perform single-channel reads. You can
multiplex several SCXI-1102/B/C modules and other SCXI modules
into a single channel on the DAQ device, greatly increasing the number
of analog input signals that you can digitize.
Detailed specifications of the SCXI-1102/B/C modules are listed in
Appendix A, Specifications.
What You Need to Get Started
To set up and use your SCXI-1102/B/C module, you will need the
following items:
❑
One of the following modules:
SCXI-1102
SCXI-1102B
SCXI-1102C
❑
❑
One of the following software packages and documentation:
ComponentWorks
LabVIEW for Macintosh
LabVIEW for Windows
LabWindows/CVI for Windows
Measure
NI-DAQ for Macintosh
NI-DAQ for PC Compatibles
VirtualBench
❑
Your computer
