USB3-FRM13_K Users Manual (Rev 1.0)
-
12
- http://www.daqsystem.com
(4 ground), the power cable can be removed from the camera. Not only it does not have any
effect the quality of data from the camera, but also it is very helpful in reducing the cost and size
of the system to remove the power source terminal.
[Figure 2-10. Connection without Power Cable]
Implementation of PoCL that is, power transfer is used by setting the Camera Link 1, 13, 14,
26 pins as [table 1,] and 1 and 26pins are used as the power(+ 12V). It can supply current of
330mA for 12V, it can supply current of 400mA for 10V as standard on 4W(watt),
For USB3-FRM13_K, PoCL function can be implemented in the Base Configuration
Connector. It is available for Base / Full Configuration camera.
[Table 1. Camera Link Connection for PoCL]
Pin
Camera Link Connector
PoCL Connector
1
Inner Shield
Power (nominal 12V DC)
26
Inner Shield
Power (nominal 12V DC)
13
Inner Shield
Power Return
14
Inner Shield
Power Return
13
12
11
10
9
8
6
5
4
3
2
1
7
26
25
24
23
22
21
19
18
17
16
15
14
20
Power Lines
Power Return Lines
[Figure 2-11. PoCL Connector Pin Out]
