PCI-EK01 Users Manual (Rev 1.0)
-
9-
http://www.daqsystem.com
(3) If the installation is completely finished, you can show below message window.
[Figure 2-5. PCI-EK01 Completing Device Driver Window]
(4) If the installation is completely finished, you can use the USB-DIO6400 board.
But, it confirm a driver normally installation in the following ways. Do the following steps to show
up the
“Device Manager” window. [My Computer -> Properties -> Hardware -> Device Manager ->
Multifunction Adaptors
->
“PCI-EK01”
]
[Figure 2-6.
“System Properties” window-“Hardware” Tab]
